The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.

The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.

The A-16II Personal Mixer is fully compatible with all Pro16_ Series products, including Aviom's digital interface card for Yamaha_ digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign_, Soundcraft_, Innovason_, etc. Look for the A-Net Active&trad; logo, and see our Partners page for additional information.

Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.

Aviom A-16II Personal Mixer

• 16-channel stereo mixer
• Fully adjustable pan per channel
• Line/headphone audio output
• Auto-detect mono/stereo circuitry
• Simple set-up with Cat-5e cables
• Sixteen Preset locations for storing custom mixes
• Channel solo, mute, and group functions
• Global trim for reducing all channel volumes
• Sixteen channel select buttons with dual LEDs
• Pan/Spread control with LED readout
• Channel volume control with LED level readout
• Master Volume, Treble, and Bass controls
• Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount

• Audio Output: ¼" TRS stereo, headphone or line level
• Line/Headphone TRS Output Tip: Audio Left; Ring: Audio Right; Sleeve: Ground
• Auto-detects mono plugs
• A-Net Input/Output 1 A-Net input, 1 A-Net output; Category (RJ45 connector)
• Digital to Analog Conversion Bit Depth: 24 bit
• Signal to Noise Ratio (Referenced to 0dB) -103dB
• Latency <0.880 msec (measured from analog input to analog output)
• Pro16 A-Net: uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
• Tone Controls: Treble +/-12dB at 9kHz shelving Bass +/-12dB at 160Hz shelving
• Maximum Levels (RMS): Line/Headphone outs: 1.0 watt at 100 ohms
• Impedance: Line/Headphone outs: 32 ohms
• Power Supply: External, DC, universal switching type
• Input Voltage: 100-240 volts, 50/60Hz, 30VA
• Output Voltage: 18-24 VDC, 0.5 amp
• Plug Size: 2 mm
• Dimensions: 10.75" (273 mm) wide x 5.6" (142.2 mm) deep; 2.25" (57.5 mm) high
• Weight: 3.4 lbs. (1.54 kg)
• Options: MT-1 Mic Stand Mount, EB-1 Extension Bracket