The AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16_ digital snake and audio distribution systems. Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net_ Pro16 digital audio transmission protocol is converted to analog using 24-bit, 48kHz converters. Sixteen balanced outputs are provided on the rear panel via DB25 multipin connectors. The analog outputs can be set (per channel pair) to +24dBu, +18dBu, +4dBu, or mic level.

Aviom AN-16/o

• 16 balanced mic- or line-level outputs
• Four-position output level switch per channel pair
• +24, +18, and +4dBu line-level, or mic-level outputs
• Converts A-Net digital stream to 16 analog audio channels
• 48kHz, 24-bit D/A converters
• Unlimited splits and digital copies
• Optional AN-16SBR System Bridge combines up to 4 A-Net streams onto one cable
• Cat-5e cable runs up to 500 feet (150 meters) between devices

• Audio Outputs 16 channels, balanced
• Outputs DB25 multipin connectors (2); Tascam_ analog audio pinout Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu
• D/A Conversion 48kHz sample rate, 24 bit
• Frequency Response 4Hz-22kHz
• A-Net Input/Output one EtherCon Category 5 (RJ45 connector)
• A-Net Expansion one EtherCon Category 5 (RJ45 connector)
• Output Level Settings Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic
• Channel LED Indicators Signal Present and Clip, per channel
• Metering LEDs; green: Signal Present; red: Clip; per channel
• Maximum Output Level +24dBu
• Output Impedance 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic)
• Freq. Response 4Hz-22kHz +0.2dB/-3dB
• THD +N < 0.004%
• Crosstalk -90dB
• Bit Error Rate (BER) 10-¹²
• Signal to Noise (unweighted) 92dB typical, A/D to D/A Measured from AN-16/i to AN-16/o v.4 Output Module
• Digital Connections A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors
• A-Net Pro16 A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable
• Latency < 0.620 msec (measured from analog input to analog output)
• Power Supply External, DC, universal switching type
• Input Voltage 100-240 volts, 50/60Hz, 30VA
• Output Voltage 24 VDC, 0.5 amp
• Plug Size 2 mm
• Power 24 VDC, 500mA
• Dimensions 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high 1.75" (44.45mm)
• Weight 6.8 lbs. (3.08 kg)
• Options: AN-16SBR System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable