The MH10f Merger Hub features the same basic functionality as the MH10 Merger Hub, but replaces ports 9 and 10 with 100 Mbps Fast Ethernet SFP slots which can be outfitted with either single- or multi-mode fiber optic transceivers (available separately; no SFP modules ship with the product).

Similar to a familiar Ethernet switch, but with features and performance designed specifically for networking and distributing audio, the MH10f offers unprecedented flexibility and simplicity in system design. The MH10f features ten bidirectional A-Net® ports. Eight ports use EtherCon RJ45 connectors, while the remaining two feature SFP slots.

In Pro64 systems running in Auto Mode, the Merger Hub creates a single network stream which is redistributed out all ten ports. This ensures that all 64 audio channels are available throughout the network, regardless of the physical location of any audio input or output. Channels can be physically located off any combination of the ten ports, even if they go through multiple Mergers.

In a Manual Mode system, the Merger Hub provides three preset configurations, allowing users to optimize the way each point merges and distributes audio channels. Each configuration preserves the bidirectionality of the system, even as inputs are separated physically off various legs of a hub.

The MH10f can also be used to provide the protection of a backup cable for main runs, as in a digital snake. The Merger Hub will also merge Aviom's Virtual Data Cable data, allowing Pro64 devices to send and share control data effortlessly over long cable distances (up to 400ft/120m over Cat-5e between devices).

The MH10f features the security of a rear-panel four-pin XLR connector for optional backup DC power.

Single-mode or multi-mode fiber transceivers can be installed in the MH10f, depending on the needs of the application or the type of fiber cabling available. The fiber transceivers and fiber cable type (single/multi) must match in order to properly communicate.

Aviom has tested the following SFP transceivers and found them to work with no problems:

• LAN Basics model OT-2001 (multi-mode)
• Avago HFBR 57EOPZ
• Finisar FTLF 1217P2BTL
• Planet MGB-LX (single-mode)

Gigabit (1 Gbps) SFP transceivers are not supported.

Aviom MH10f

• Distribute and merge up to 10 Pro64 A-Net streams over Cat-5e or fiber
• 8 EtherCon bidirectional Pro64 A-Net ports
• 2 100 Mbps Fast Ethernet SFP slots
• Supports single- and multi-mode SFP fiber transceivers
• Three channel-routing configurations
• Supports redundant cable paths
• Internal universal power supply; IEC power connector
• Four-pin XLR Connector for optional backup DC power

Aviom MH10f

• LED Indicators: A-Net Active, x10
• A-Net: 8 EtherCon® RJ45 connectors, rear panel 2 100Mbps Ethernet SFP fiber optic transceiver slots, rear panel
• A- Net Cable Length 400 feet (120 meters) between devices (Cat-5e) Fiber optic performance varies according to the type of transceivers used (single/multi)
• SFP Transciever Requirements: 100 Mbps Fast Ethernet; Class 1 laser device SFP: use duplex LC connector Gigabit (1 Gbps) SFP transceivers are not supported
• Power Supply: 100-240VAC 50-60Hz, 24W Internal switching type; IEC connector
• Backup DC Power Inlet: 24VDC, 2.0 amp max. 4-pin XLR (Pin 1: GND; Pin 4: 24VDC)
• Dimensions: 1U: 19"w x 8"d x 1.75"h (482.6 x 203 x 44 mm)
• Weight: 8 pounds (3.63 kg)