NE4250, NE4250M, NE4250C, NE4250D, NE4250E, NE4250DC, NE4250DE, NE425070, NE425070M, NE425070C, NE425070D, NE425070E, NE425070DC, NE425070DE, NE4250PE, NE4250PEM, NR4250PEC, NE4250PED, NE4250PEE, NE4250PEDC, NE4250PEDE, NE425070PE, NE425070PEM, NE425070PEC, NE425070PED, NE425070PEE, NE425070PEDC, NE425070PEDE

Connecting and controlling an amplifier for networked systems has now been simplified with Ashly's NE Series amplifiers. Network Enabled (NE) amplifiers offer ease of use, setup and control using standard 10/100 Ethernet protocol and Protea NE Software. No special outboard control units are needed.

Four, four-channel models with output power at 250W are available to fill a wide variety of low impedance, 70V performance installation or constant voltage applications. NE Series amplifiers are offered two ways; standard input with euroblock connectors and “pe” (Protea Enabled) with euroblock input connectors and world renowned Protea DSP signal processing.

The DSP signal processing library is extensive and utilizes two SHARC 32-bit/96kHz processors. Processing blocks include Graphic, Parametric, Notch and Shelving Equalization, High-, Low- and All-Pass Filters (HPF/LPF/APF) with up to 48dB/Octave slopes, Delay, Compressor/Limiter, Gate, Ducking, Auto-leveler, Gain and Signal Generators (sinewave, white and pink noise). A full Matrix Mixer with assignable routing allows any input to drive any or all amplifier outputs. Presets can be used to store and retrieve global parameters of an entire amplifier's control surface and DSP section.

Additionally, each amplifier also provides DC voltage control of the attenuators which makes it a snap to control volume from remote locations, preset recall, Remote Power Standby and data in and out ports for connecting accessories like the WR-5 to control user selected parameters. There are LED indicators for power, standby, protect, network communications and each channel has a four-step signal meter, bridge mono, temperature and current indicators.

Four-channel Mic-pre, AES/EBU, and Cobranet modules will be available as options. Eight-channel NE series amplifiers are also available.

Ashly NE4250, NE4250M, NE4250C, NE4250D, NE4250E, NE4250DC, NE4250DE, NE425070, NE425070M, NE425070C, NE425070D, NE425070E, NE425070DC, NE425070DE, NE4250PE, NE4250PEM, NR4250PEC, NE4250PED, NE4250PEE, NE4250PEDC, NE4250PEDE, NE425070PE, NE425070PEM, NE425070PEC, NE425070PED, NE425070PEE, NE425070PEDC, NE425070PEDE

• Four Channel Amplifier
• Ethernet control Is standard
• Low-Z, 70 Volt Models
• Extensive DSP Available
• Easy and intuitive user interface
• Extensive protection circuitry
• Safety/Compliance: cTUVus/FCC, CE (pending), RoHS
• Front panel:
  • Level attenuators for each channel
  • Power switch can be disabled by software
  • 4-Step Signal Level and Clip LEDs
• Rear panel:
  • 10/100 Ethernet port
  • Euroblock inputs
  • Euroblock outputs
  • Remote level control
  • Preset recall
  • Remote power turn-on/off
  • Data in and out ports

Ashly NE4250, NE4250M, NE4250C, NE4250D, NE4250E, NE4250DC, NE4250DE, NE425070, NE425070M, NE425070C, NE425070D, NE425070E, NE425070DC, NE425070DE, NE4250PE, NE4250PEM, NR4250PEC, NE4250PED, NE4250PEE, NE4250PEDC, NE4250PEDE, NE425070PE, NE425070PEM, NE425070PEC, NE425070PED, NE425070PEE, NE425070PEDC, NE425070PEDE

• Rated Power 8 ohms (per channel) 150W
• Rated Power 4 ohms (per channel) 250W
• Rated Power 8 ohms (Bridged) 500W
• Rated Power 25V Not Rated
• Rated Power 70V model (per channel) 250W
• S/N (20 Hz-20 kHz, unweighted) >98dB
• 1/8th Output (Pink Noise) 31.25W
• 1/8th Draw (Pink Noise) 200W
• 1/8th Current (Pink Noise) 2.7A
• Idle Power (Pink Noise) 30W
• Idle Current (Pink Noise) 0.4A
• Weight: Net 21.0 lbs. (9.53kg)
• Shipping 26.0 lbs. (11.79kg)
• Frequency Response (8 ohms) 20 Hz - 20k Hz, (unweighted) ±1dB
• Input Impedance 20k ohms, balanced
• Input Sensitivity 6.2dBu
• Maximum Input Level +21dBu
• Internal HPF ( 70V model) (contolled by software) 80Hz (12dB/oct), 400Hz (6dB/oct), and OFF
• Damping Factor (8 ohms) < 250
• Cooling Temperature dependent speed-controlled fan (Front in, Side out)
• Output Circuitry Class D
• Connectors (each channel) Input - Euroblock, Output - Euroblock
• Front Controls AC Power Switch, Individual input attenuators
• Front indicators (LED color) Power (Blue), Standby (Yellow), Protect (Red), Disable (Yellow), Com (Green), Bridge (Green), Signal Level -18dB, -12dB (Green), -6dB (Yellow), Clip (Red), Temp (Yellow)
• Rear Controls Ethernet 10/100, Channel bridge switch (Low-Z only), Remote standby, Preset recall (4), Remote Level (4), Remote Data
• Amplifier and Load Protection Output Overcurent, DC Output, Main Supply Rail Overvoltage, Chassis Temperature, Inrush Limiting, Mains Fuse
• Cordset 15A Edison 3-Prong IEC
• Dimensions
  • Height: 3.50” (88.9mm) 2RU
  • Width: 19” (483 mm)
  • Depth: 15.5” (394mm)
• Environmental 40-120deg. F, (4-49deg. C) noncondensing

Ashly NE4250 Four-Channel 250 Watt Amplifier, NE4250, NE4250M, NE4250C, NE4250D, NE4250E, NE4250DC, NE4250DE, NE425070, NE425070M, NE425070C, NE425070D, NE425070E, NE425070DC, NE425070DE, NE4250PE, NE4250PEM, NR4250PEC, NE4250PED, NE4250PEE, NE4250PEDC, NE4250PEDE, NE425070PE, NE425070PEM, NE425070PEC, NE425070PED, NE425070PEE, NE425070PEDC, NE425070PEDE

• WR-1 2-ch Level Control
• WR-2 Four Position Switch
• WR-5 Programmable Selector